Disclaimer Statement

Boss Polymer Technologies Pty Ltd publishes the contents of this website on the terms and understanding that:

1. This publication is provided “as is” and without a warranty of any kind, either express or implied, as to any products or services contained in this website. The onus is upon the customer to inform him/herself of products and/or services purchased from Boss Polymer Technologies.

The customer cannot rely on this website to establish fitness for purpose of those products and/or services for the customers’ use.

2. Despite all care being taken by Boss Polymer Technologies in the preparation of this website, some technical inaccuracies and/or typographical errors may inadvertently appear. Changes may periodically occur, without notice, to the information.
Any changes to the website contents will be incorporated in future revisions of this website.

3. Boss Polymer Technologies is not responsible for and will not be held liable for:

a: the results of any actions (including, but not limited to, the purchase of any product and/or use of services referred to in this website) taken by the reader of this website or a customer of Boss Polymer Technologies, on the basis of information from this website; nor
b: for any error in or omission in this website.

4. In no event will Boss Polymer Technologies be liable for any damages, either direct, incidental or consequential, lost profits or lost data as a result of a reader of this website or a customer of Boss Polymer Technologies having relied upon the contents of this website, even if Boss Polymer Technologies has been informed of the possibility thereof.

5. Boss Polymer Technologies has not reviewed the content of any sites linked to this website and is not responsible for the content of any off-site pages or any sites linked to this website.

6. All products and services are subject to our standard terms and conditions of sale, which are linked to the bottom of most pages on this website.

7. Some profiles/mouldings/systems may be subject to exclusivity.

8. Information is offered as a general guide only. In relation to the suitability of various polymers for use in contact with chemicals and fluids it provides an indication only.

9. The rating system used is based upon published literature of various polymer suppliers and rubber manufacturers, and in certain instances upon considered opinion of experienced rubber technologists.

Information is offered in good faith, we cannot, however, guarantee its accuracy, nor assume responsibility for its use. Several factors must be taken into consideration when evaluating a polymer for use.

IN LIGHT OF THIS, IT IS ALWAYS BEST TO TEST.